GM says its supplier shift will open the doors for smaller firms

David Sedgwick and Mike Colias
AUTOMOTIVE NEWS

Published: March 3, 2014 9:09 am ET
Updated: March 3, 2014 9:29 am ET

Related to this story

Topics Automotive
Companies & Associations General Motors Co.

DETROIT — Among the big questions surrounding General Motors Co.'s new initiative for building stronger supplier relations: How will it affect the 2,300 smaller suppliers that didn't get an invite?

The answer goes something like this: There is room for the little guys — especially if they bring cutting-edge innovations to the table.

After a year at the helm of GM's massive purchasing operation, global chief Grace Lieblein last week outlined the Strategic Supplier Engagement program, her strategy to repair fractured supplier relations that she acknowledges have prevented GM from accessing the supply base's best innovations.

The program will offer such perks as better access to GM purchasing brass, earlier looks at GM's product and technology plans, and even training to those suppliers that rate highly on several key measures — from cost containment and other basics to "cultural" aspects such as transparency. Of its 2,700 direct-materials suppliers, GM will include its largest 400 in the program, representing about 90 percent of its purchasing spend globally.

The move underscores how GM is leaning on its suppliers more than ever to deliver technology in areas such as safety and fuel efficiency that are becoming the key competitive battlegrounds for automakers.

"It's a framework for how we want to work with suppliers and strengthen our relationship with them to become the customer of choice," Lieblein told Automotive News in an interview last week. Automotive News is a sister publication of Plastics News.

While GM's program is aimed at its biggest suppliers, Lieblein says GM does not intend to earmark a bigger portion of its overall purchasing budget to those companies — the 90 percent figure shouldn't change much. She said smaller suppliers can request to have their performance assessed and potentially earn the benefits, too.

Those with cutting-edge technology will have an opportunity to participate earlier in GM's product planning under the program.

One example: Plasan Carbon Composites, a small company in the Detroit suburb of Wixom that produces carbon-fiber hoods for the Chevrolet Corvette. Plasan CEO Jim Staargaard said GM appears to be committed to this technology for the long haul, declining to discuss specifics.

"Let's just say they wouldn't be helping us if they didn't believe in the technology," Staargaard said.

Plasan makes the parts at a new plant in Walker, Mich.

Better insight into GM's future plans, not only for certain models but also for specific technologies, is perhaps the main carrot for suppliers, says Mike Martini, president of the original equipment division of tire maker Bridgestone Americas and a member of GM's supplier council.

"We don't want to be working on innovations that the (automaker) will ultimately have no interest in because they found some different solution," Martini says.

GM will assess suppliers annually in two broad areas. The first is business performance, including quality, cost containment, performance on vehicle launches and supply chain efficiency; the second is cultural performance, which will measure transparency, effective communication and innovation in engineering.

Only those suppliers deemed "prime" will qualify for the program's incentives. Suppliers that fall short will have a chance to work with GM to improve their performance in time for the next annual assessment, Lieblein said.

GM seems to covet the same access to supplier technology that BMW AG currently enjoys. In a survey of North American suppliers conducted for Automotive News last year by Deloitte & Touche, BMW ranked highest among 14 automakers for its support of suppliers' innovations, in part because it involved them early in product development. Ford ranked second, while GM was ninth.


Comments

GM says its supplier shift will open the doors for smaller firms

David Sedgwick and Mike Colias
AUTOMOTIVE NEWS

Published: March 3, 2014 9:09 am ET
Updated: March 3, 2014 9:29 am ET

Post Your Comments


Back to story


More stories

Image

Visteon in talks to sell its stake in Halla Visteon Climate Control JV

November 26, 2014 9:07 am ET

Visteon Corp. confirmed this morning that it is in discussions with a private equity firm to sell its stake in South Korean joint venture Halla...    More

Image

Canada's Papp Plastics is eyeing big opportunities with JV in Mexico

November 24, 2014 4:11 pm ET

Canadian injection molder and turnkey solution provider Papp Plastics & Distributing Ltd. will open an $11 million to $12 million joint venture...    More

Image

Indiana injection molder PRD expands

November 24, 2014 1:56 pm ET

Automotive supplier PRD Inc. is expanding its manufacturing facility in Springville, Ind.    More

Image

Can plastics return to the driver's seat?

November 24, 2014 6:00 am ET

When the June 1989 issue of Popular Science introduced three cutting-edge automotive technologies, including the latest Corvette and a powerful...    More

Image

New GM purchasing chief faces big hurdles to improve supplier relations

November 24, 2014 11:11 am ET

Steve Kiefer is moving into the eternal hot seat that is head of GM global purchasing and supply chain.    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events