Korea's Dongshin looks at Vietnam molding machine factory

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: March 6, 2014 12:06 pm ET
Updated: March 6, 2014 4:53 pm ET

Image By: Steve Toloken Philip Kim, CEO of Dongshin Hydraulics Co. Ltd., is considering production expansion to Vietnam.

Related to this story

Topics Asia, Machinery

HO CHI MINH CITY — South Korean injection machine maker Dongshin Hydraulics Co. Ltd. is seriously considering setting up a manufacturing facility in Vietnam, to cater to Southeast Asia’s growing market, the company’s top executive said in an interview in the country.

While Vietnam’s economy has slowed sharply the last two years, Dongshin sees long-term potential from local growth and the sizable presence of Korean manufacturers in the country, CEO Philip Kim said.

“It’s going to be fully assembled, fully manufactured, in the Haiphong area — that is my target,” he said, in an interview at the Plastics & Rubber Vietnam 2014 show, held March 4-6 in Ho Chi Minh City. “I would like to make the machinery here and targeting to Southeast Asian countries, not for the Western countries.”

He said it was “most likely” that the company would move ahead and build the factory, which he said would be a US$10 million investment with, eventually, capacity to make 1,000 presses a year. A decision is likely this year, he said.

The company currently has facilities at its Busan, South Korea, headquarters, and in Ningbo, China. But Kim said China is becoming a more difficult place to operate.

“In China, there is not much advantage any more, with the labor costs growing,” he said. As well, he said Dongshin has had labor stoppages and difficult situations with Chinese unions in its factory.

Vietnam does not have much domestic equipment manufacturing, but if Dongshin went ahead with the plans, the Korean firm would join China’s Haitian International Holdings Ltd. in manufacturing injection molding machines in Vietnam. Haitian opened its facility, outside Ho Chi Minh City, in 2011.

Any Vietnam plant would initially have to import many of the components because the country does not have a well-developed support infrastructure, but Kim said he hoped to convince some of his suppliers, particularly metal casting firms, to also locate in Vietnam.

“They don’t have much infrastructure yet, but that’s why I am trying to induce other suppliers,” he said. Nonetheless, he said the company is taking a hard look at Vietnam.

“I already ordered to my people to set up the company here first and try to find a location [for the manufacturing plant],” he said. “If you can make it at a reasonable price here in Vietnam, not competing with the Taiwanese or Chinese machines, with the Korean quality with a Vietnamese price, I think I have a chance to sell it here.”

Vietnam’s rapid economic growth slowed dramatically in 2012 and 2013, with 2012 economic growth of 5 percent, its lowest level since 2000. Growth had topped 8 percent a year for the several years prior to 2012.

Most companies at the trade fair said conditions remained difficult in Vietnam but many also said there were anecdotal signs of a turnaround.

Some broader indicators were also pointing in a positive direction: The European Union Chamber of Commerce in Vietnam, for example, said Feb. 25 that its business survey of members operating in the country found a “significantly increased” business confidence in the first quarter of the year.

Kim said he considers the long-term potential of Vietnam and its 100 million residents good, and pointed to the large Vietnam manufacturing operations of Korean conglomerates like LG and Samsung, the world’s largest mobile phone maker.

A January article by the Vietnam Economic News service, for example, said half of the roughly 250 million mobile phones Samsung makes each year are produced in Vietnam.

Samsung by itself accounted for 10 percent of Vietnam’s total exports in 2012, the news service said.

Kim said Dongshin plans to make its smaller hybrid machines in Vietnam, from 80 to 550 tons clamping force. He said the company plans to produce the same version of its machines in Vietnam that it makes in its other factories.

“I’m not going to sell a low-profile [injection press] here and degrade my machine and just adapt to the Vietnamese lower market,” he said. “I don’t want to do that. I want to have the brand name with the quality.”


Comments

Korea's Dongshin looks at Vietnam molding machine factory

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: March 6, 2014 12:06 pm ET
Updated: March 6, 2014 4:53 pm ET

Post Your Comments


Back to story


More stories

Arburg expands facility in the Czech Republic

August 1, 2014 8:56 am ET

Germany-based machinery company, Arburg, has extended its subsidiary in Czech Republic.    More

Buyer plans to sell former Hoover molding, assembly plants

July 31, 2014 2:06 pm ET

A former Hoover manufacturing plant with 150 injection machines in El Paso, Texas, and a nearby maquiladora plant in Juarez, Mexico, changed owners...    More

Image

North American robot sales set record

July 30, 2014 4:46 pm ET

The North American robotics sector is off to its fastest start ever, shattering last year's first-half record, with a first-half 2014 of 14,135...    More

Image

Formosa to be compensated for Vietnam riot

July 28, 2014 1:44 pm ET

Taiwan's Formosa Plastics Group will receive $2.39 million from the Vietnamese government and insurance companies for damages suffered during the...    More

Image

Acquisition expands Rieke Packaging's stake in Asia

July 28, 2014 4:39 pm ET

Diversified rigid packaging components producer Rieke Packaging Systems now has a bigger footprint in Asia.    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events