Canada's recycling rate grew by 10 percent in 2012

By Michael Lauzon
Correspondent

Published: March 20, 2014 1:02 pm ET
Updated: March 20, 2014 2:04 pm ET

Related to this story

Topics Sustainability, Recycling, Canada

Canada’s plastic packaging recycling rate grew in 2012 for the third year in a row, according to a study commissioned by Canadian Plastics Industry Association of Mississauga, Ontario.

In total, more than 627 million pounds of post-consumer plastics packaging was recycled in 2012, 10 percent more than in the previous year. About 83 percent of the volume was consumed in North America, CPIA reported on March 19.

Plastics collected for recycling included bottles, rigid containers, film, bags, outer wrap and expanded polystyrene. The materials were processed into new bottles, fleece jackets, pipe, pallets, crates, decking and lawn and garden products.

Bottle recycling grew 3 percent to 384 million pounds. Rigid containers, at 78 million pounds, were up 29 percent versus 2011. Plastic bags and outer wrap rose 18 percent to 97 million pounds. Expanded polystyrene volumes were up 24 percent to 2 million pounds.

“We continue to work with our members to build and grow our national recycling industry in Canada, re-using valuable plastic materials and creating jobs,” stated CPIA President and CEO Carol Hochu in a news release.

Canadian recyclers want more supply since they have underutilized capacity, the study found. Film and bag recyclers used 49 percent of their capacity in 2012 while non-bottle rigid container recyclers ran at 60 percent of capacity.

Moore Recycling Associates Inc. of Sonoma, Calif., conducted the survey called 2012 Post Consumer Plastics Recycling in Canada.


Comments

Canada's recycling rate grew by 10 percent in 2012

By Michael Lauzon
Correspondent

Published: March 20, 2014 1:02 pm ET
Updated: March 20, 2014 2:04 pm ET

Post Your Comments


Back to story


More stories

Image

Plastics enter 2015 on a high note

January 29, 2015 10:10 am ET

Now that the preliminary round of December data is officially in the books, I can state unequivocally that 2014 was an outstanding year for the U.S....    More

Image

Plastics help Volt hit new target

January 28, 2015 1:54 pm ET

The 2016 Volt, unveiled at the North American International Auto Show in Detroit in January, features a sportier exterior design — GM calls it...    More

Image

FPI joins curbside recycling group

January 28, 2015 11:47 am ET

Foodservice Packaging Institute is joining the board of the Curbside Value Partnership, a non-profit group that works to improve curbside recycling...    More

Image

Agricultural container recycling grows

January 28, 2015 11:42 am ET

Plastic pestitcide container recycling shot up by nearly 40 percent last year, according to new statistics from the Virginia Department of...    More

Image

PC used in academy roof retrofit

January 28, 2015 8:55 am ET

Polycarbonate sheet meets the demands of a “living roof” in a retrofit at the California Academy of Sciences in San Francisco.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events