Canada's recycling rate grew by 10 percent in 2012

By Michael Lauzon
Correspondent

Published: March 20, 2014 1:02 pm ET
Updated: March 20, 2014 2:04 pm ET

Related to this story

Topics Sustainability, Recycling, Canada

Canada’s plastic packaging recycling rate grew in 2012 for the third year in a row, according to a study commissioned by Canadian Plastics Industry Association of Mississauga, Ontario.

In total, more than 627 million pounds of post-consumer plastics packaging was recycled in 2012, 10 percent more than in the previous year. About 83 percent of the volume was consumed in North America, CPIA reported on March 19.

Plastics collected for recycling included bottles, rigid containers, film, bags, outer wrap and expanded polystyrene. The materials were processed into new bottles, fleece jackets, pipe, pallets, crates, decking and lawn and garden products.

Bottle recycling grew 3 percent to 384 million pounds. Rigid containers, at 78 million pounds, were up 29 percent versus 2011. Plastic bags and outer wrap rose 18 percent to 97 million pounds. Expanded polystyrene volumes were up 24 percent to 2 million pounds.

“We continue to work with our members to build and grow our national recycling industry in Canada, re-using valuable plastic materials and creating jobs,” stated CPIA President and CEO Carol Hochu in a news release.

Canadian recyclers want more supply since they have underutilized capacity, the study found. Film and bag recyclers used 49 percent of their capacity in 2012 while non-bottle rigid container recyclers ran at 60 percent of capacity.

Moore Recycling Associates Inc. of Sonoma, Calif., conducted the survey called 2012 Post Consumer Plastics Recycling in Canada.


Comments

Canada's recycling rate grew by 10 percent in 2012

By Michael Lauzon
Correspondent

Published: March 20, 2014 1:02 pm ET
Updated: March 20, 2014 2:04 pm ET

Post Your Comments


Back to story


More stories

Image

SPI hopes to build on EPS recycling

November 26, 2014 6:00 am ET

Successfully recycling expanded polystyrene can be a challenge, there's no doubt about that. EPS, however, has value, is in demand and deserves to be ...    More

Image

Pan-European plastics recycling show scheduled for 2015

November 26, 2014 6:00 am ET

Europe is to get its first pan-European exhibition and conference aimed at the region's plastics recycling industry next year.    More

Image

World Plastics Council takes on sustainbility for its initial priorities

November 25, 2014 9:51 am ET

The recently formed World Plastics Council (WPC) has set marine debris and post-consumer recycling and energy recover as its initial top priorities.    More

Image

Canada's Papp Plastics is eyeing big opportunities with JV in Mexico

November 24, 2014 4:11 pm ET

Canadian injection molder and turnkey solution provider Papp Plastics & Distributing Ltd. will open an $11 million to $12 million joint venture...    More

Image

AMA Plastics adds presses, changes management structure

November 24, 2014 3:57 pm ET

AMA Plastics Inc. has strengthened its management structure, received recognition for entrepreneurship, achieved quality improvements and added three ...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events