China's pipe makers adopt voluntary code in face of safety worries

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: April 3, 2014 2:32 pm ET
Updated: April 3, 2014 3:48 pm ET

Image By: Steve Toloken Wang Zhan Jie, China Plastics Piping Association secretary general

Related to this story

Topics Construction, Pipe/Profile/Tubing, China, Plumbing

KUNMING, CHINA — China’s plastics pipe trade association wants the industry to clean up its act and stop using recycled materials and the neurotoxin lead to manufacture drinking water pipe.

Following government scrutiny and a high-profile media report, the Beijing-based China Plastics Piping Association on April 1 launched a code for self-regulation for its members, which includes explicit bans on using recycled plastics in drinking water pipe or engaging in bribery to get contracts.

The plan, unveiled at the group’s annual conference, comes after a January expose by China’s state-run broadcaster CCTV that showed pipe makers in Jiangsu province using recycled material to make substandard drinking water pipe.

Recent local government investigations have also targeted plastic pipe, the Shanghai-based China Urban Water Association told the conference.

For example, a July 2013 examination by water regulators in Anhui province found that 10 of 42 companies were making drinking water polyethylene pipe that did not meet standards. A review of plastic pipe companies by government officials in Zhejiang province in March found that only 10 percent were meeting standards, the water association said.

Last year also marked the first time that health departments in China began inspecting plastic pipe manufacturers, CPPA said, an indication of rising concern about public health and water pollution. Inspectors have visited more than 150 pipe factories, CPPA said.

It all added up to environmental issues and industry self-regulation being a prominent theme at CPPA’s annual conference, held April 1-3 in Kunming.

Wang Zhan Jie, CPPA general secretary, criticized the improper use of recycled materials, done as a way to cut costs, and said the situation has been a black eye for the entire industry.

“Because some illegal material has been exposed, this left a very bad impression in the public about plastic pipe,” he told the conference. “People think plastic pipe is harmful.”

Some CPPA members claimed that the problem of improper materials is more common among smaller companies, and argued that larger companies were more responsible in their material use.

CPPA said its new self-regulation scheme would include promotion efforts to bolster the image of plastic pipe.

Wang said the self-regulation code will include enforcement. He said CPPA will investigate complaints against companies and give warnings, or if needed, kick out those firms that do not comply.

While the industry is placing a lot of emphasis on the voluntary code, the approach has some limits, such as not covering companies outside the CPPA.

Only about 400 of the estimated 6,000-10,000 plastic pipe manufacturers nationally belong to CPPA, it said. But CPPA said those 400 companies account for 70 percent of China’s total pipe production.

Wang said companies that are not CPPA members could sign the self-regulation code.

There were also calls in speeches for more government regulation, although Wang gave no indication of any signs that the Chinese government is planning a big crackdown as it did last year against the plastic recycling industry, an operation that became known as Green Fence.

Zheng Xiaoming, a director at the China Urban Water Association, told Plastics News after his speech that there should be stronger mechanisms for closing down companies that improperly use recycled materials in drinking water pipes.

He said he believes the problems could be solved, and said the attention and public discussion was helpful.

There were other materials-related problems discussed at the conference.

Qian Guijing, president of the Beijing-based China Plastics Processing Industry Association, said the industry needs more “self-discipline” in manufacturing, and urged companies to also not use lead as a stabilizer in PVC pipes.

CPPA is working with companies to phase out lead in all PVC pipe applications, and hopes to have all CPPA members agree to switch to calcium or other stabilizers by the end of 2015, Wang said.

Others at the conference, however, noted that both recycled materials and lead are cheaper than virgin materials or other stabilizers.

As long as the industry faces severe overcapacity — China’s plastic pipe production capacity of 25 million metric tons is twice current demand — industry officials said economic pressures to cut corners could remain strong.

Some participants, including the head of the Yunnan Provincial Plastic Industry Association, noted in speeches that bribery to get contracts is another risk factor that can lead to poor quality pipe being used. CPPA felt strongly enough about unethical practices to devote part of its one-page code to it.

“We should not use improper or illegal behaviors such as bribery to participate in market competition,” the CPPA code said.

One industry executive said that China’s pipe industry has developed so quickly in recent years that it’s raced ahead of the government’s ability to monitor it.

But now that the country’s growth rate is slowing, the authorities will catch up and over time problems like the use of recycled materials will decline as the industry matures, said Jiang Jia Cheng, chief executive of Wealpro Pipeline Industry Group Co. Ltd. in Yingkou, Liaoning province.


Comments

China's pipe makers adopt voluntary code in face of safety worries

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: April 3, 2014 2:32 pm ET
Updated: April 3, 2014 3:48 pm ET

Post Your Comments


Back to story


More stories

Image

China's plastics industry making a shift

January 27, 2015 3:41 pm ET

China's plastic industry is in the midst of a “profound adjustment” from large-scale and high-speed growth to growth focused on quality,...    More

Image

Citadel opens second compounding facility in China, near Shanghai

January 27, 2015 3:22 pm ET

Citadel Plastics Inc., the American manufacturer of thermoplastic and engineered composite compounds, has opened its second facility in China,...    More

Image

Kingspan adds more European production with Joris Ide acquisition

January 27, 2015 10:30 am ET

Kingspan Group plc has purchased insulated panels and building systems supplier Joris Ide Group for 315 million euros ($356 million).    More

China's growth hits 24-year low

January 21, 2015 10:17 am ET

The world's second largest economy reported its 2014 gross domestic product growth at 7.4 percent, the lowest since 1990. The plastics industry...    More

Image

Emerging markets beckon China's toymakers

January 21, 2015 2:08 pm ET

Manufacturers at the recent Hong Kong Toys & Game show say plummeting oil prices have had negligible effect on toy makers' bottom lines.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events