Shale-gas boom should spark growth in Ohio's industrial base

Dan Shingler
CRAIN'S CLEVELAND BUSINESS

Published: April 9, 2014 1:55 pm ET
Updated: April 9, 2014 1:58 pm ET

Related to this story

Topics Materials, United States, Materials Suppliers

CANTON, OHIO — Northeast Ohio, and especially its business community, needs to be thinking and talking more about how the region’s broad industrial base can capitalize on the shale-gas boom.

That was the message delivered April 7 by Team NEO’s Paul Boulier, at the Canton chamber’s “Plastics Products from Utica Energy” event. His goal was to “stimulate thinking, create ‘readiness,’ drive dialogue and hopefully spark ideas” about how shale drilling can boost area manufacturing.

Boulier was there largely because of his background in the plastics industry, including stints managing local companies such as A. Schulman, Core Molding Technologies, Avery Dennison and Nova Chemicals. Admittedly, he’s been at it a long time — about three decades.

But these days, he’s more of a salesman. As a business attraction vice president for Team NEO, he told an audience in Canton that his product — Northeast Ohio’s industrial landscape mostly — just got a lot more arable.

A supply of local feedstock will be a boon for plastic compound makers and the rest of the related food chain, right through to molders and their tool makers, Boulier said. At the same time, industry generally stands to enjoy relatively low electric rates, which is attractive to just about any manufacturer in any industry.

“They all need electricity,” Boulier said.

The various cost benefits resulting from increased domestic natural gas production are not lost on many in industry. Just a day after Boulier made his comments, Jacob Prak, CEO of the manufacturing and engineering firm Michigan Manufacturing International, also was touting the benefits of shale gas on the industrial sector.

In commenting on the outlook for manufacturing generally, Prak said in email correspondence that shale gas, in particular, was fueling a positive outlook.

“Cheaper natural gas feed stocks are making U.S.-produced plastics and other materials less expensive than in other parts of the world,” Prak wrote. “This in turn will mean that finished products which rely on these materials will be more competitive.”

As for ongoing investments directly related to shale gas, the writing is already on the wall — not to mention more than a few dotted lines, he said — as evidenced by a recent tally of $19 billion in Utica Shale infrastructure investments in Ohio to date, and related developments like Odebrecht’s announcement of a cracker plant to produce natural gas derivatives in Parkersburg, W. Va. That last one would be an investment of as much as $5 billion by the big Brazilian oil and gas services company.

The chances of getting $19 billion in in-state investments prior to shale drilling? “Four years ago? It was probably zero,” Boulier said.

Those Ohio investments go along with current investments across the United States of about $100 billion in 148 major projects, with 53 percent of that capital coming from foreign firms looking to take advantage of the U.S. business climate for plastics and chemicals, he said. In the United States, the Gulf Coast gulps down most of that — more than 75 percent — but the Ohio Valley gets about 13 percent.

“If we get 13 percent now, what about getting 20 percent,” is a mantra Boulier would like to hear others parrot.

“Use it or lose it,” he says, with regards to the vast amount of natural gas liquids and related raw materials about to come out of the ground in Ohio in the coming years.


Comments

Shale-gas boom should spark growth in Ohio's industrial base

Dan Shingler
CRAIN'S CLEVELAND BUSINESS

Published: April 9, 2014 1:55 pm ET
Updated: April 9, 2014 1:58 pm ET

Post Your Comments


Back to story


More stories

Image

Consumer products sector sees improving growth

August 27, 2014 12:49 pm ET

It is late summer, and we are already almost two-thirds of the way through the third quarter. But I find myself wanting to bask in the warm afterglow ...    More

Image

Design Stories: Young designers showing the way in adaptive design

August 27, 2014 12:12 pm ET

Amanda Bolton, then 19, decided to change her major at the University of Cincinnati from fine arts to industrial design, creating products for people ...    More

Image

Sony entering recycled PC market

August 27, 2014 11:08 am ET

Consumer electronics giant Sony Corp. is getting into a sideline of selling recycled resins.    More

Image

Mission Plastics brings new automated work cell on line

August 26, 2014 4:17 pm ET

Custom injection molder Mission Plastics Inc. and a customer have created a $1.5-million automated work cell for a medical diagnostics product.    More

Image

Canadian thermoformer ICI gets new financial backing

August 26, 2014 3:11 pm ET

Innovative Composites International Inc. (ICI) will get a $1.5 million infusion in the form of a loan and equity funding to cover a corporate restruct...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events