Polyair rebuilds from Sandy with help from Process Control

By Jim Johnson
Senior Staff Reporter

Published: April 16, 2014 4:11 pm ET
Updated: April 16, 2014 4:21 pm ET

Image By: Emile Wamsteker, Bloomberg Flooding from Hurricane Sandy rolled through neighborhoods and industries alike.

Related to this story

Topics Film & Sheet, Machinery, Process Controls & Software

Hurricane Sandy gutted Polyair Inter Pack Inc.’s Carlstadt, N.J., plant more than a year ago, and Brian Clawson won’t soon forget the devastation.

He can still picture sloshing around the site in his boots, amid the water, slime, raw materials and finished goods that were once strewn together on the factory floor.

“The plant up there had over 3 feet of water in it from front to back. Most of the equipment was wiped out. All of the control panels, all of the electronics were wiped out in the plant,” the engineering specialist for Polyair said.

“It was just total devastation,” added Plant Manager Joseph P. Hickey in a separate interview.

But that was then, and this is now and the plant is back doing what it does: making bubble wrap and associated products.

And that’s thanks, in part, to the folks at Process Control Corp.

Making bubble wrap in Carlstadt requires a whole host of equipment and raw materials and logistics. One piece of equipment helps another do its job.

That’s where Process Control came to the rescue, pushing work to the front of its production line to help deliver new equipment in a matter of just a few weeks instead of months to the Polyair site.

“Within three weeks we had equipment, which was just amazing,” Clawson said. “They actually were so quick to react that they were ahead of everybody else we had lined up, which really, really helped us out.”

Process Control provided both a new grinder and a new resin pump as Polyair worked to rebuild the facility. The resin pump moves material from storage silos into a blender where it is prepared for processing. The grinder handles the site’s manufacturing waste that is recycled and mixed with virgin pellets to make new product.

“The place was wiped out. We had no phones. No computers,” Clawson remembered. Even cell phone usage was spotty because local towers were overloaded with traffic.

It was a time when finished rolls of bubble wrap served as chairs as Clawson and fellow employees worked their phones to line up goods and services to reopen the site.

Despite the level of damage sustained by the plant, the glum mood of the workers started to shift within a week after the flooding, Hickey said.

“When all of our employees saw that we were going to stand behind them, they stood behind us. We were able to dive in headfirst,” he said.

No workers were laid off during reconstruction of the facility. Employees were kept on the payroll to help clean up the facility wherever they could, and Hickey credits support from the company’s upper management as well as outside vendors as keys to restoring the facility by last March.

Cleanup crews, after Sandy hit in late October 2012, initially needed two or three weeks just to clear all of the debris and clean the building. Because of contamination concerns from toxins in the floodwaters, the company was required to sweep out the site five times and mop down the site another five times before it was deemed safe.

Only then could Toronto-based Polyair start rebuilding.

For the folks at Process Control, calls from customers in a bind do happen from time to time, said Mark Venable, a process engineering manager for the Atlanta-based company. And the company does what it can to help get their customers out of problems.

To help Polyair, the company was able to push production of the grinder to the front of the assembly line after asking another firm to delay its own grinder order.

Process Control does not make equipment to keep on hand for inventory purposes because those machines are expensive and come with a variety of options.

To push the grinder and pump through the assembly process in a fraction of the time normally needed, Process Control used some overtime as well as expedited purchase of parts, Venable said.

“That’s certainly a rewarding thing,” he said about helping out Polyair. “It’s a bonus when you can help someone in this kind of situation and help keep their business going and trying to minimize the devastation that the hurricane caused.

“That makes the job very rewarding,” he said.

Clawson is on the road constantly, moving from one Polyair location to another to do his job. The work — new equipment installation, training and troubleshooting — can be predictable and routine.

But not this time.

“You never wish that upon anybody,” he said about the damage and cost to his company. “That was a new, challenging experience.”


Comments

Polyair rebuilds from Sandy with help from Process Control

By Jim Johnson
Senior Staff Reporter

Published: April 16, 2014 4:11 pm ET
Updated: April 16, 2014 4:21 pm ET

Post Your Comments


Back to story


More stories

Image

Plastic products win Best of IBS awards

January 30, 2015 1:36 pm ET

LAS VEGAS — A year ago, inventor Jeremy Smith of Utah took his idea for an electrical outlet cover plate with LED lights on the bottom edge to...    More

Image

Yizumi's stock price shoots up

January 30, 2015 11:56 am ET

Chinese injection press maker Guangdong Yizumi Precision Machinery Co. Ltd. has seen its stock price more than double in the first five trading days...    More

Image

China to lead the way on robots

January 30, 2015 11:12 am ET

More industrial robots will be operating in China’s production plants than in the European Union or North America by 2017.    More

Image

Profit dips at Bemis Co. Inc.

January 29, 2015 2:04 pm ET

Profit dipped for Bemis Co. Inc. for all of 2014, but were up during the fourth quarter in what the company's leader called a “pivotal year....    More

Image

Plastics News Now: Losing weight with style, plastics in the Dragons' Den

January 29, 2015 6:00 am ET

A 19-year-old entrepreneur brings business to a U.K. injection molder after winning support on TV's Dragons' Den, auto suppliers combine h...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events