Quebec's Recyc RPM forced to shut down for restructuring

By Michael Lauzon
Correspondent

Published: June 19, 2014 3:59 pm ET
Updated: June 23, 2014 9:27 am ET

Related to this story

Topics Sustainability, Recycling, Canada

A major plastics recycler in Quebec has shut down while it works on a restructuring plan.

Recyc RPM Inc. has capacity to recycle 50 million pounds per year of high density polyethylene and polypropylene at plants in Beauceville and St. Damien, Quebec, but recently laid off its staff of 90.

Recyc RPM vice president of sales and marketing Jean Yves Bacle blamed contaminated waste streams, inefficiencies in the province’s recycling system and lack of government support for the company’s problems.

Bacle said in a telephone interview that a typical bale that Recyc RPM received from municipalities contained 15 to 40 percent contaminants, ranging from inappropriate plastics to glass shards. He said one batch even contained an engine block.

“We were spending C$100,000 (US$92,000) a month sending the waste to landfill,” Bacle stated.

Recyc RPM wasn’t able to operate at capacity because of the waste. The firm has an optical sorter, eight extrusion lines and other equipment, mostly at its headquarters plant in Beauceville. Extra washing of the feedstock also added costs so that the company was spending about C$2.5 million (US$2.3 million) a year in total to obtain a clean stream of scrap plastic.

Bacle said the scrap collection system in the province is inefficient. About 37 municipalities and other parties collect curbside waste, far too many for a province with 8.2 million residents, he claimed.

Quebec’s government compensates municipalities and other parties handling curbside waste through fees it collects from companies that produce containers, packaging and printed materials. The province has paid out nearly C$500 million (US$460 million) in the compensation program since 2005, estimated Benoit de Villiers, CEO of government agency Recyc-Quebec

Bacle said private sector companies that reprocess collected materials should get a cut of the funding.

“Providing direct, regular funding for recyclers through the compensation program could interfere with competition rules, which is something to avoid,” de Villiers stated in an email. He said recyclers’ production costs should be reflected in their contracts with municipal sorting facilities.

De Villiers added the province is considering a study to see how “the economic flows of curbside recycling can be optimized to benefit the entire value chain.”

Bacle said provincial funding for recyclers from the province is below par with other Canadian provinces. Recyc RPM got a loan to improve operations but the interest rate wasn’t favorable, according to Bacle. De Villiers said recyclers have access to financial assistance and his agency provided the company with C$475,000 (US$437,000) to buy equipment.

“We are asking the Quebec government to at least pay for the cost of shipping unusable scrap to landfill,” Bacle stressed.

Recyc RPM filed a notice for a plan to restructure on May 23. Raymond Chabot Inc. of Quebec City is acting as trustee in Recyc RPM’s bankruptcy protection from creditors.

The company owes secured creditors, mainly financial institutions and a provincial investment agency, about C$8.2 million (US$7.5 million). Unsecured creditors, including risk-capital lenders, government agencies and a host of contractors and suppliers, are owed C$11.2 million (US$10.3 million).

Recyc RPM did not handle PET scrap. Several other Quebec companies reprocess PET and some is shipped to Ontario for reprocessing, according to de Villiers.

Recyc RPM is the second major Canadian recycler to run into financial trouble this year. In April, Greenline Resins Inc. of Woodstock, Ontario, had its assets go on the auction block.

“There is a market out there for recycled resins,” Bacle said. “If our plan works we hope to reopen.”

Recyc RPM’s origins date to 1989 under the leadership of Louis and Luc Metivier, members of the family that started molder and extruder IPL Inc. of St Damien. The Metivier family and other investors sold their IPL stakes in 2010 to investment firms Novacap Investments Inc. and Fonds de Solidarite FTQ.


Comments

Quebec's Recyc RPM forced to shut down for restructuring

By Michael Lauzon
Correspondent

Published: June 19, 2014 3:59 pm ET
Updated: June 23, 2014 9:27 am ET

Post Your Comments


Back to story


More stories

Image

Brown signs California's plastic bag ban into law

September 30, 2014 1:38 pm ET

Gov. Jerry Brown (D) made it official today: plastic bags are banned across the entire state of California.    More

Image

Japan's parts makers face challenges as carmakers expand supply base

September 29, 2014 11:01 am ET

For all their size and success, Japanese auto suppliers that rocketed to global dominance on the coattails of their No. 1 customer, Toyota Motor Corp....    More

Image

Recycling group releases shrink sleeve label guidelines

September 26, 2014 4:02 pm ET

A post-consumer plastics recycling trade group is out with a set of recommendations to help guide the packaging industry on the use of shrink sleeve...    More

Image

Chemical regulation policy update likely to remain in limbo

September 26, 2014 1:13 pm ET

Efforts to broker a deal on national chemical regulation policy appear to have fallen apart in the waning days of the 113th Congress, leaving...    More

Image

ATI strikes gold with bowling pinsetter production

September 26, 2014 12:30 pm ET

Heavy-duty equipment used to arrange and re-set bowling pins netted three awards for Associated Thermoforming Inc. in the parts competition at the Soc...    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events