Newlight ramping up commercial greenhouse-gas-to-plastic production

By Roger Renstrom
Correspondent

Published: June 24, 2014 3:50 pm ET
Updated: June 24, 2014 11:41 pm ET

Image By: Roger Renstrom Darren Beck of Sprint Corp. with an iPhone protective case made of Newlight Technologies LLC's greenhouse-gas-based plastic.

Related to this story

Topics Consumer Products, Sustainability, Materials, Materials Suppliers

Newlight Technologies LLC is preparing to expand its greenhouse gas-to-plastic manufacturing capacity by ramping up to 50-million-pound-per-year capacity over the coming quarters, said CEO Mark Herrema.

While yet to be proven in high-volume production, the AirCarbon technology has disruptive potential with its removal of greenhouse gases including methane produced from dairy farms, said Darren Beck, director of environmental initiatives in the corporate responsibility innovation pipeline at Sprint Corp. headquarters in Overland Park, Kan.

The strength of the proprietary Newlight technology depends on how effectively microbes convert carbon dioxide or methane to a thermoplastic polymer.

Sprint says it is the first telecommunications company to launch a carbon-negative retail product using AirCarbon.

Sprint is beginning to market covers for protecting Apple Inc.’s iPhone 5 and iPhone 5s cell phones. Each cover displays the AirCarbon logo and a dated imprint, in one case saying, “Pulled from air 5/21/13.”

Separately, computer technology firm Dell Inc. of Round Rock, Texas, is starting to use sleeves of AirCarbon to package its Latitude series notebook computers.

In 2003, Herrema co-founded Newlight, which is based in Irvine, Calif., and handles research and production in nearby Costa Mesa. “Newlight’s combined operations cover multiple acres of space,” Herrema said.

In 2013, after 10 years of continuous pilot and demonstration scale operations, Newlight scaled up its patented greenhouse gas-to-plastic production process to commercial scale at a four-story, multi-million-pound-per-year production facility converting air and captured methane-based carbon from an agricultural digester into AirCarbon thermoplastic, he said.

Sprint began working with Newlight in mid-2013. Beck said the process toward acceptance of the application involved staff consideration sequentially through Sprint’s functions for environmental initiatives, products and accessories.

Whether Sprint expands its use of AirCarbon for device housings or other products “depends on consumer reaction” to the initial cell phone covers, Beck said in a June 5 interview during the Sustainability Brands conference in San Diego.

For some orders, Newlight pre-colors AirCarbon prior to shipping to injection molders, Herrema said by email. For other orders, molders can add color onsite via the masterbatch process.

For the Sprint cases, Newlight ships AirCarbon pellets in both pink and black forms to custom injection molders.

Sprint will sell the protective cases through its website for $29.99 plus tax. Other cell phone cases currently on the Sprint website originate from petroleum-based resin and cost $19-$100. Principal suppliers are Body Glove International of Redondo Beach, Calif., and Otter Products LLC of Fort Collins, Colo., the latter under both its OtterBox brand and recently acquired TreeFrog Development Inc.’s LifeProof imprint.

“Newlight is working with more than 25 partners including a number of brand-name market leaders and Fortune 500 firms,” Herrema said. The aim is to launch AirCarbon products “across a range of market segments including automotive, electronics, construction, packaging, furniture and apparel.”

Herrema anticipates development of  “products that maintain performance, reduce cost and reverse the flow of carbon out of the air” through use of the use of AirCarbon in the extrusion, blown film, cast film, thermoforming, fiber spinning or injection molding processes.

He envisions potential applications now using resins “ranging from linear low density polyethylene and thermoplastic elastomers to homopolymer and impact co-polymer polypropylene and ABS.”

U.S. and international authorities have issued more than 14 patents to Newlight, and the firm has hundreds of patent claims pending.


Comments

Newlight ramping up commercial greenhouse-gas-to-plastic production

By Roger Renstrom
Correspondent

Published: June 24, 2014 3:50 pm ET
Updated: June 24, 2014 11:41 pm ET

Post Your Comments


Back to story


More stories

Image

EPA fines RI polymer company

August 29, 2014 1:20 pm ET

A Rhode Island polymer manufacturer has reached a $60,000 settlement with the U.S. Environmental Protection Agency (EPA) for violating federal clean...    More

Image

Chinese compounders seek market shares, often at the expense of margins

August 29, 2014 10:02 am ET

China's largest compounder, Kingfa Sci. & Tech. Co. Ltd., as well as its more automotive-focused counterparts Shanghai Pret Composites Co. Ltd. and...    More

Image

Green trend boosts plastic building materials business in China

August 29, 2014 9:42 am ET

The greening of China's domestic building materials market is giving the plastics industry a boost.    More

Image

PP prices rise 5 cents

August 28, 2014 3:59 pm ET

After a one-month break, volatility has returned to the North American polypropylene resin market, with prices increasing by an average of 5 cents...    More

Image

DuPont fined for 2010 chemicals release

August 28, 2014 1:37 pm ET

DuPont Co. has been fined almost $1.3 million for the release of several chemicals — including plastics feedstock phosgene — at its plant ...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events