North American Plastics Alliance celebrates three years, and welcomes Anipac

William Carteaux
Carol Hochu
Steve Russell

Published: August 20, 2014 1:35 pm ET
Updated: August 20, 2014 1:41 pm ET

Related to this story

Companies & Associations Anipac, Society of the Plastics Industry Inc., American Chemistry Council

Three years ago, the three leading plastics industry associations in the U.S. and Canada formally joined forces to create the North American Plastics Alliance (NAPA). Although we already were cooperating on many issues, we agreed that by memorializing a commitment to work together we could create efficiencies and be more effective as representatives of this large and diverse industry.

So what exactly has NAPA undertaken over these three years? Quite a bit.

Quick background: We set out in 2011 to coordinate our individual efforts on specific initiatives and programs in four areas:

• Outreach — to promote better understanding of plastics’ benefits;

• Advocacy — to encourage public policy that supports the growth of the plastics industry;

• Energy recovery and recycling — to facilitate increased recycling and recovery of plastics’ stored energy content; and

• Pellet containment — to extend wide-scale adoption of Operations Clean Sweep throughout North America and beyond.

While observing our anniversary in July, we proudly added another member: Anipac, the leading plastics association in Mexico. It was a gratifying way to celebrate our alliance, making it a truly North American entity. NAPA now encompasses the Plastics Division of the American Chemistry Council (ACC), the Canadian Plastics Industry Association (CPIA), The Society of the Plastics Industry Inc. (SPI) — and Asociación Nacional de Industrias del Plástico, AC (Anipac).

At the start, we believed that leveraging our individual programs through enhanced cooperation among alliance members would provide increased value to our associations and our member companies. And we were correct.

For example, on the outreach front, although each of our U.S. and Canadian associations has communications programs, we now routinely promote each other’s content through social media, greatly expanding the reach of our individual efforts.

On the advocacy front, CPIA representatives joined with ACC and SPI in Washington for the plastics industry “fly-in” in July, demonstrating the cross-border nature of the North American industry. Representatives from seven plastics associations, along with 111 member company participants, went to Capitol Hill to meet and discuss key issues with elected officials. In total, we met with 122 members of Congress, enhancing our industry’s profile in the capital and underscoring our contributions to jobs and sustainability.

The three U.S. and Canadian associations also are actively involved in energy recovery projects. In the City of Edmonton, Alberta, we’re working together to determine if adding more non-recycled plastics to a system that converts waste to gas improves efficiencies and results in better synthetic fuel products. (So far the answer appears to be yes.) The system is a full-scale gasification facility that is part of Edmonton’s efforts to divert 90 percent of its waste from landfills through recycling, composting, and waste-to-fuels technologies. We also are working together on plastics-to-oil projects to jumpstart technologies that convert the energy in non-recycled plastics into fuels.

Plastics recycling in the U.S. and Canada continues to show year-over-year growth, supported by a myriad of technical and communications programs to improve collection and scrap value sponsored by our associations. This fall, SPI will coordinate a meeting of North American plastics recycling association leaders to share best practices on plastics recycling and determine how to work more closely together in the future.

Efforts to improve and expand programs that help prevent resin pellets from entering waterways and the marine environment were particularly successful. In 2011 only the U.S. associations and their member companies were implementing Operation Clean Sweep. SPI created the Operation Clean Sweep initiative in 1992 to focus on proper containment of plastic pellets by resin producers, transporters, bulk terminal operators, and plastics processors.

Today, plastics associations in 12 additional countries, including Canada and Mexico, have launched Operation Clean Sweep. U.S. and Canadian associations have pledged to increase member company participation in Operation Clean Sweep this year by 30 percent and 20 percent, respectively. In addition, Plastics Europe is transitioning its member country associations to the initiative. These efforts are part of the global plastics industry’s public commitment to tackle a global problem: plastic litter in the marine environment.

So what’s next? There’s more to do in each of these areas, and through the alliance, we’re discovering new ways to be more efficient and more effective. Our industry is large, diverse and growing every day. And it’s clear that our needs are best served when we all work together.

The North American plastics industry is resurging following a severe recession, with new opportunities brought on by cost-advantaged shale gas. NAPA pledges to help maximize that resurgence through cross-border cooperation and leveraged resources to enhance opportunities for the plastics industry and its products — in the U.S., Canada, and now Mexico.

William Carteaux is the president and CEO of the Society of the Plastics Industry Inc.

Carol Hochu is the president and CEO of the Canadian Plastics Industry Association.

Steve Russell is the vice president, Plastics Division of the American Chemistry Council.


Comments

North American Plastics Alliance celebrates three years, and welcomes Anipac

William Carteaux
Carol Hochu
Steve Russell

Published: August 20, 2014 1:35 pm ET
Updated: August 20, 2014 1:41 pm ET

Post Your Comments


Back to story


More stories

Image

Proposed green building standard delayed until late 2016

November 27, 2014 6:00 am ET

Anyone not ready for a new green building standard — one that may include more favorable ratings for plastics — is getting something of a ...    More

Image

Group backs plastic window alternatives

November 27, 2014 6:00 am ET

A new industry working group is figuring out how to help plastic break through the glass ceiling.    More

Image

SPI hopes to build on EPS recycling

November 26, 2014 6:00 am ET

Successfully recycling expanded polystyrene can be a challenge, there's no doubt about that. EPS, however, has value, is in demand and deserves to be ...    More

Image

2014 US machinery shipments up 6 percent

November 25, 2014 5:17 pm ET

Through the first nine months of 2014 U.S. shipments of primary plastics equipment — for injection molding, blow molding and extrusion —...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events