Upgraded testing equipment, speedier printing times and more flexible components are in the works for downstream auxiliary equipment providers anxious to help processors improve their manufacturing capabilities and reduce scrap.
Addex Inc. (Booth E9733): Introduction of a surface/gap winder with reverse winding capabilities for blown film.
Agr*TopWave LLC (Booth S891): The new PETWallplus vision preform inspector - also shown with a blow molder at booth S1615 - combining a noncontact wall thickness monitoring system with a precision camera-based inspection system, providing both sidewall thickness distribution monitoring and random defect detection in the seal surface and base of PET containers. Also the vision Bottle Gauge 7000, a vision-based dimensional measuring system for containers, and the PG9810-ML, a noncontact automated measuring device to determine the presence and thickness of nylon-based materials in PET preforms and containers.
Air Logic Power Systems Inc. (Booth N8537): New Model SS-100 high-speed, single-head leak tester and the new RHU leak tester along with improvements to the ALPS Vision System rotary leak tester.
Apex Machine Co. (Booth S2645): The C500RS plastic closure two-color rotary hot stop and coating system, capable of hot stamping in two colors, clear coating and ultraviolet light drying of plastic closures at speeds of 80-100 parts per minute.
Automated Vision Technology Inc. (Booth E11307): Two new inspection systems, the MoldInspector and the TrayInspector. MoldInspector is a standalone turnkey system to inspect molds before and after parts ejection. The TrayInspector, also an in-line system, can detect pinholes and thin spots on multiple thermoformed trays.
Avalon Vision Solutions (Booth N7122): Updating of the Process Rx for Avalon's PlantVision 7 system allows remote monitoring via the Internet. Production data and images from specific process runs can be viewed and analyzed from any computer equipped with the Internet Explorer Web browser.
BAG Corp. (Booth E13022): The Tubular Super Sack container is aimed for use as a linerless option for fine and hygroscopic materials.
Baublys Control Laser Corp. (Booth E10928): Expansion of the company's laser marking systems with the Image and Accent laser markers in 1064nm, 532nm and 355nm wavelengths and introduction of the Comet 25-watt carbon dioxide marking system with a wavelength of 10,600nm.
Belvac Production Machinery Inc. (Booth E13113-): The MT series of rotary moil trimming and finishing machines are rated at up to 400 containers per minute, allowing blow molders to eliminate waste from poor separation of dual bottle logs. Belvac's ``burnishing'' system can smooth out rough edges on the inner neck finish and top sealing surface.
Blue Wave Ultrasonics Inc. (Booth N7247): Demonstrations of the ultrasonic cleaning system used for injection molds, cavities and tooling.
Branson Ultrasonics Corp. (Booth S2542): A full line of Laser IRAM assembly systems, shown in both simultaneous and wide-beam scanning modes. The firm also will show other welding units, featuring ultrasonic, thermal and vibration techniques.
Bunting Magnetics Co. (Booth N4737): Selection of magnetic hot-stamping bases, hot-stamping magnetic cylinders and steel-backed dies. Magnets and holding assemblies in hundreds of shapes and sizes to equip custom fixtures. Metal separators and aluminum frame conveyors .
CDS Custom Downstream Systems Inc. (Booth E12439): A display of six machines for extrusion - the CSS 3-3 servo saw, CCH 120-100 cleat haul-off, CSPH 460-6 pipe haul-off, CCHB 48H-27 slab haul-off, CHVST 16-20-15 high-volume spray cooling tank and CVC 14-475 vacuum calibration table.
CEAST USA Inc. (Booth N7012): The series of new testing equipment going online includes the Vicat 500-D for oil-free tests, Rheologic 5000 twin - which can configure capillary rheometers for one or two barrels - a Cryo Dispenser allowing for the simultaneous testing of up to 100 specimens and a new midrange-priced series of melt flow index testers.
Chem-Pak Inc. (Booth N4528): Per-Fix Black for polypropylene and thermoplastic olefin is designed to cover blemishes on hard-to-match black components.
Clinton Instrument Co. (Booth E10733): The Model PDC-20 dialectric pinhole detector is for use in the in-line testing of plastic sheet, film and discrete parts.
CMD Corp. (Booth E9913): Demonstrations are set of the high-speed draw tape bag-making Model 6052 module. The Model 1552 rotary bag machine has had its folding and sealing techniques enhanced while the 4213 RO rotary overlap bag winder also has been improved.
Comet Automations Systems Inc. (Booth S3022): The launch of three new systems - the Gravi Mix micro blender, Gravi Mix continuous gravimetric blender, Vision Systems PE-300 - and showing of an improved Honeycomb dehumidifying dryer is set. The PE-300 is a hand-held monitor that can sense flash, short shots, contamination or other potential signs of problems impacting the cavities, core pins and slides with 0.03 second of scan time.
Com-Ten Industries (Booth N7210): Introduction of the ComTouch total control material test unit with a hand-held controller capable of use in any Com-Ten Universal Test System as well as some older units. Com-Ten will also launch a universal test stand with single- and twin-screw units available in five capacities from 1,000 to 20,000 pounds.
Corotec Corp. (Booth E10721): Corotec's blown film corona treating system is set for debut, with its open frame design for easy access and two-sided corona treatment capability. The company also will show its UniDyne concept corona treatment system for narrow-web converters and its PlasmaJet unit for molded parts.
Cumsa (Booth E10262): The EDS II is designed to allow greater ability to trace injection molded parts while improving quality and lowering production costs.
Dassett Process Engineering Ltd. (Booth N7925): Display of automatic de-bagging and bagging machines for dairy containers.
Davinor Ltd. (Booth E9039): LayerGauge can be used to simultaneously measure the thickness of all of the layers in a multilayer film sample.
DuKane Corp. (Booth S1462): Several new welding systems will be announced during NPE in addition to displays of current vibration, hot plate, spin and ultrasonic welders.
Eagle Manufacturing Corp. (Booth E12936): The HPS-24-RSA is an entry level in-line thermoplastic profile fabrication machine, equipped with a pneumatic punching head, a servo-controlled traveling tool carriage, touch-screen operator interface, two emergency stop controls, a slug chute and custom profile lead in.
Enercon Industries Corp. (Booth S818): Air plasma, flame plasma and chemical plasma surface treating systems to improve adhesive properties. The firm also is introducing a capless sealing system as an alternative to conduction which can be retrofitted to existing conduction systems.
Erhardt + Leimer Inc. (Booth E10759): The AFS Corona Treater and Elsis surface inspection systems are set for introduction. The AFS system includes a generator and a treatment station, while the Elsis unit can be used in plastics for detection of a lamination defect, scratches, inclusion and gel.
Extrusion Services Inc. (Booth N5776): The next-generation low-cost servo cutter and puller with quick change capabilities is set for introduction.
Forward Technology Industries Inc. (Booth N4549): Rinco Dynamic Series ultrasonic welders are the newest forward technology system, with a 32-bit microprocessor control for precise, repeatable performance. The firm also has improved its digital drive vibration welder with the DLVW2248, a larger unit with higher efficiency and faster welding times.
Gabo Qualimeter Testanlagen GmbH (Booth E10832): The Eplexor system for material testing, thermal analysis, components testing, quality control, relaxation, creep and fatigue.
Graphics International Group (Booth N5171): The Omso Hergo is an automatic machine for dry offset printing of up to nine colors on tapered cups with high production capacity.
Hekuma GmbH (Booth S291): The automated in-mold labeling system set for display includes the new Heli-U 1700 robot, capable of meeting clean-room standards for food packaging, and able to label four conical cups with a total cycle time of 3.5 seconds.
Impact Analytical (Booth E11232): A three-step method has been developed to test methods to isolate, identify and measure taste and odor-causing components in bottles for drinking water.
Instron Corp. (Booth N4352): Three testing systems are set for introduction - the Dynatup 9250, the 5,500 series and the 3,300 series. Dynatup tests impact properties in plastics and elastomers; the 3,300 single-column testing unit checks tensile, compression and flexural properties; and the 5,500 series is used for tensile, compressive, peel-and-tear properties of elastomers and the chemical additives of materials used in tires and medical devices.