CHICAGO (May 15, 10:40 a.m. EDT) — With more interest in recycled resins as raw materials costs rise, companies that make recycling equipment are in full force for NPE 2006.
Here is a listing of companies showing recycling lines, pelletizers, granulators and shredders that promise more efficiency and less waste, and complete systems to break down even the hard-to-recycle plastics.
AEC/Granulate (Booth S1802): GP Series of cost-efficient granulators with short clean-out times.
Autogrind (Booth S2249): Central or beside-the-press general- purpose auto grinders for injection molding, blow molding and extrusion. Screenless grinders designed to grind hard, thick, brittle injection molding sprues and parts for closed-loop recycling. Beside-the-press, low-speed grinders with low noise generation.
Bunting Magnetics Co. (Booth N4609): Magnets to remove contaminants from recycled materials.
Colortronic Inc. (Booth N5026): 1018 Series beside-the-press granulator with integrated rotating end discs for low-heat granulation and reduced frictional wear.
Conair Group Inc. (Booth S2649): NCR Series compact, low-speed, energy-efficient, beside-the-press granulators.
Cresswood Recycling Systems (Booth E9025): Low revolution-per-minute single-shaft shredders and material-handling equipment from 30-70 inches wide.
Cumberland Engineering Corp. (Booth S2642): Several new products including its X and 3200 series adjustable rotor knives, which allow for a closer rotor knife tip-to-screen tolerance; space-saving, energy-saving S Series screenless granulators; new clean room granulator for the medical and electronic molding industries with an in-feed hopper design that prevents particles above size and volume tolerance levels from escaping.
Econ GmbH (Booth N9946): Underwater pelletizing systems, pyrolysis furnaces, screen changers. Introducing a screen changer with an automated venting system that will enable production lines to run without melt pumps, and a leakage-free screen changer that prevents leakage when processing temperatures are higher.
Economizer USA (Booth S3028): ESS 850 paper-plastic-film-fiber shredder with rugged self-aligning gearbox.
Erema North America Inc. (Booth S1185): Plastic recycling systems, including its new model 906T designed for reclaiming low, linear low and high density polyethylene, and polypropylene, in both rolls and loose materials. Its new model 600 KAG edge-trim recycling system with a remote, multiple machine monitor panel also will be among items on display.
Eriez Magnetics (Booths S1396, E11205): Introducing its new PolyMag technology, which allows for the automated separation and recovery of mixed resins to reduce the cost of scrap for molders doing multishot and coinjection, coextrusion and sequential three-dimensional blow molding.
FBE Corp. (Booth N5920): Screenless granulators and fine separators, including a new Tri-Cutter screenless granulator and Bridge-Buster hopper.
Gala Industries Inc. (Booth N5952): Underwater pelletizers, centrifugal dryers, turnkey pelletizing systems and turnkey pellet production systems for hot-melt adhesives.
Gamma Meccanica SpA (Booth N8305): Recycling lines for plastic materials, cutting systems, feeder systems, extruders and accessories for recycling lines.
Gemco Pelletizing Dies and Machining (Booth N4592): Underwater pelletizing die plates. Also on display, precision machining, fabricating and assembly services.
Granutec Inc. (Booth S1318): Press-side and central Auger-Matic granulators and Pick-a-Part separators.
Granutech-Saturn Systems (Booth S1342): Rotary shear shredders, automobile flatteners, ferrous/nonferrous balers and wood-waste processors.
Harden Industries Ltd. (Booth N7245): Showing its smaller EPS compactor and screen changers, melt pumps and hot-air welding guns.
Hosokawa Polymer Systems (Booth N5549): Its display of granulators, dedusters, pulverizers and size-reduction systems, including the new Cyclomix, developed primarily for mixing cohesive powders. Cyclomix is also suitable for moistening, plastifying and granulating, and can be used with materials that have powdery, fibrous or pasty consistency.
Laidig Systems Inc. (Booth E10147): Bulk storage and reclaim systems and programmable feed-to-process systems.
Munchy Ltd. (Booth N5061): Recycling equipment, including machinery with new specifications, designs and outputs.
Osprey Corp. (Booth N4533): In-line and off-line recycling systems will be on display, including a new in-line pelletizer, a new film grinder line and a new scrap heat compactor.
Pallman Pulverizers Co. Inc. (Booth N4101): Size-reduction equipment, systems and services.
Patt Technologies (Booth N7244): Patt Filtration Rotary IV screen changer has a larger filtration area and greater back-flush capability than the previous model. Also offering dies, knives, barrels and adapters and coating and consulting services.
Pelletizer Knives Inc. (Booth S3212): Cutters, knives.
Plastec North America Inc. (Booth E10521): Showcasing new Moditec Integrated Metal Detection system for its line of ultralow-speed granulators. Designed to work with all types of injection molding processes, especially insert molding. The IMD system provides beside-the-press granulators that have metal detection in the cutting chambers, aimed at preventing damage to knives. Plastec North America is Moditec's sole U.S. distributor.
Precision AirConvey Corp. (Booth N4052): Will introduce its 21-model line of plastic repelletizers that enables film processors to capture edge trim, roll scrap and other film waste, convert it to pellets and reintroduce it into the extrusion process in a closed reclamation loop that safeguards material purity. The line accommodates polyethylene, polypro-pyl-ene, polystyrene, ABS, metallocenes, coextrusion blends and other commodity and engineering resins.
PSI Polymer Systems Inc. (Booth N6340): Auxiliary equipment for extrusion applications, including gear pumps, screen changers, mixers and melt filtration devices. New equipment on display will include all-metal, high-temperature, leak-free seals for manual screen changers, a 10-inch hydraulic screen changer, EGP line of gear pumps for challenging materials and new line of drop-in replacement gear pumps for most major brands.
Rapid Granulator Inc. (Booth S2155): Granulators and size-reduction systems. It will showcase its new Granumatic shredder for plastics and 150, 260 and 350 series of granulators.
Resource Recycling Systems Inc. (Booth N7004): New forced-feed granulators that can increase capacity threefold and reduce power consumption by as much as 40 percent. Size reduction and washing systems.
Rieter Corp. (Booth N5715): Pelletizing systems for all pellet shapes.
Scheer Bay Co. (Booth N4056): Strand pelletizing equipment. New designs of its WAA strand dewatering unit, AXP08 strand pelletizer and AX08P pultrusion-style pelletizer will be on display.
Size Reduction Specialists Corp. (Booth N5920): Showcasing its new Tri-Cutter screenless granulator that reduces the particle size of regrind to very small sizes to accommodate smaller tonnage injection machines and Bridge-Buster hopper. Also on display will be its new within-the-hopper Bridge-Buster force-feed control system that consistently forces large runners into cutting chambers, eliminating many of the problems associated with feeding large runners into an automated, regrind cutting system. New Bi-Cutter CRD screenless granulator that can be placed within a clean room at press side.
Starlinger & Co. GmbH (Booth E9946): Plastics recycling equipment, nonwoven recycling machines, IV and solid-stating machinery, sack production machinery.
Steinmetz Innovation GmbH (Booth N8440): Agglomerator systems that turn thermoplastic waste such as fibers, films or powders into free-flowing, high-density granules. Precision pulverizer system with improved cooling of grinding track that comes with a central gap-setting device that can precisely set gap during operation.
Sterling Inc. (Booth S1849): CGMB medium-tangential granulator for reclaiming large, bulky parts.
Sweco (Booth E10643): Separation equipment, centrifuge and treatment services equipment, water filters, centrifugal sifters, grinding and finishing mills, SentryScan screen-break detection systems.
Vecoplan LLC (Booth E9601): Demonstrating its HiTorc and SureCut technologies. The SureCut shredder rotor's cutting geometry is designed for film and fiber reclamation. The HiTorc digitally controlled, magnetic-pulse shredder drive helps achieve high torque when processing tough materials and also decreases energy consumption. Also on display will be its VH-series of horizontal shredders and granulators in 14 models.
Versa Machinery (Booth N7237): Downstream equipment for extrusion lines. Cutters, pullers, cutter/puller systems, transport conveyors and air ejectors.
Weima America Inc. (Booth E9820): Size reduction equipment, shredders, grinders.
Wittmann Inc. (Booth S2549): SJD Series screenless granulators with separate feed shaft with hooks to grab large parts.
Xaloy Extrusion LLC (Booth N5016): Screen changers, melt pumps, oven cleaners, pelletizers. Will showcase its new JCP-1760 cleaning oven designed for cleaning larger parts such as screws for extrusion and injection applications, two new pump sizes, seven new continuous screen changers that can be configured either horizontally or vertically to provide continuous polymer flow. New polymer testing products, including the APA 2000, an advanced polymer analyzer that can measure the mechanical properties of thermoset materials before, during and after curing. The analyzer can also characterize thermoplastics in the melt, during solidification, and can determine the end product modulus. Formerly Dynisco Extrusion.